Dark Realms City of Corsairs "building 1"

 

        It took less than a roll to print. The Ender 3 did everything but the roof, doors, and shades. Those were done on the Flashforge. All in all it was a 5 days printing time.

        All sprayed a Lowes ork-ish yellow. AP bone at a 60 degree angle. Then flat white from greater than 12".

        Blocking in colors while waiting on other things to happen.. Some by brush and others with the airbrush. 

        The shade cloth on the 3rd floor attaches to the 3rd and roof. The roof can be removed. I have glued the roof in place and did not add the door.

        As I was finishing it up. The shade thing that hangs off the side I broke twice putting it away. I can't keep fixing these and I want them to last more than one go around. So everything will get mounted a Sarissa tile or have a base it will slot into.

    

           I already have everything for old projects. It will be Sarissa tiles, a pencil, wall paste, and a green stuff roller.

Step 1; The building foot print and supporting structures are penciled in. You got to ensure you always use the logo side or the other. The tiles will not line up if you do not keep that straight. Then all the tiles need two light coats of vanish. If you don't they will warp.

Step 2; The wall paste is smacked down where the structure will not be. The paste needs to be old. You have to put on a very little. So little you will fear it won't work. If it is new there is too much moisture. It will get into the tile and will stick to the roller, not the tile

Step 3; Roll away. Don't push down at all. The paste will stick in the roller and you will create lines at the edge of the rolled area. Look close you can see where I did it. If you do, drag a flat edge over it and roll again.

Step 4; Ask jesus for patience. Don't touch it to check if its dry. This crap will take a day or two to dry fully.

Step 5; Once dry, Matte Stone rattle can.

Step 6; AP Strong tone dip.

Step 7; Dry brush AP Castle grey followed by GW White Scar.

Step 8; Spring green grass, no static grass gun. Battlefield's high desert flock. The sand is extremely fine.

        The building sabot's into the tile. Where the shade thingy remains attached to the tile. The ground, 1st, and 2nd floor can be separated. The roof is glued down. For now it is stored in the linear cabinets. As the more buildings are done. They may need plastic boxes for bulk storage and transport.

Mountain

2023

Bought = 6, 1 collection 

Sold = 35, 71 Detachments

Painted = 185

28mm = 33

20mm = 88

15mm = 0

10mm = 0

Epic = 49

Terrain bought = 51

Terrain painted = 15

Printed Terrain = 4

Printed = 30

Games

Games played = 11

Games hosted = 5

Books

Bought = 1

Read = 3

2022

Bought = 1289 + a collection + 3 Armies

Sold = 76, 14 Buildings, 22 detachments + 3 Armies + a game

Painted = 763